For systems delivered without screen, keyboard or mouse, it is possible to switch between security levels using floppy disks.

 

 
There is one diskette per security level:
 - 1 diskette to switch to HIGH security level.
 - 1 diskette to switch to MEDIUM security level.
 - 1 diskette to switch to STANDARD / Normal security level.

 

We deliver 3 executables to build the diskettes.

 

The procedure to install/use the floppy disk is identical as a customer installable patch procedure.

 

 1-1) Download the 3 executables mentionned above :

 

 1-2) Save each of the 3 executables on your local computer.
       Note: There is one executable file per security level.

 1-3) Collect 3 floppy disks

 1-4) For each executable, Double click on it, this will guide you through
        the creation process of the diskette.

 1-5) Follow the instructions to build the diskette.

 1-6) Put a sticker corresponding to the security level  (HIGH, MEDIUM or
        STANDARD / Normal) and the release (V2.0) on each created
        diskette

 

      * Guiless_secupack_HIGH_V20.exe  stands for HIGH security level, 
      * Guiless_secupack_MEDIUM_V20.exe  stands for MEDIUM security 
         level
      * Guiless_secupack_STD_Normal_V20.exe  stands for STANDARD or
         Normal security level

 

 2-1)  Shut down the Océ Power Logic Controller.

 2-2)  Insert the diskette containing the level needed (HIGH, MEDIUM or
         STANDARD / Normal) in the controller disk drive.

 2-3)  Restart the controller.

 2-4)  Wait until the process is completed: a melody is played (a 3 tonal
         beeps played twice).
        Notes:  - The controller restarts automatically before the melody is
                      played.

 2-5)  Remove the diskette.
        Notes: - 2 rapid beeps are played when the security level has 
                    already been installed.
                  - Nothing happens or 7 rapid beeps are played when the level
                    cannot be installed (e.g. when not compatible with the Océ 
                    TDSxx0/TCSx00 version).

3) How to identify the security level installed
    On system without any Screen/Keyboard/Mouse, the way to identify the
   security level is through "Print Settings" :

 

 3-1). Make a print settings (refer to your printer User Manual for more
         details).

 3-2). Go to the last printout page in the section SDS - CONTROL
         PARAMETERS 22-1.
  The last line is called: Patches installed=XXXXXXXXXXXXXXXY
  Check the last character Y:
 
If  Y= 2 or 6 or A or E  --->   HIGH security level is installed
If  Y= 1 or 5 or 9 or D   ---> MEDIUM security level is installed
If  Y= 0 or 4 or 8 or C   ---> STANDARD /Normal security level is installed