| Patch for |
Océ TDS300 1.1.8.1/1.1.5/1.1.4
Océ TDS320 1.0.8.1/1.0.8/1.0.2/1.0.1
Océ TDS400 2.1.8.1/2.1.5/2.1.4
Océ TDS450 3.2 and lower versions
Océ TDS600 4.1.8.1/4.1.8/4.1.6/4.1.4
Océ TDS700 1.1 and lower versions
Océ TDS800 2.1.8.1/2.1.5/2.1.4
Océ TDS860 1.0.8.1/1.0.8/1.0.3/1.0.2
Océ TCS300 1.1.2 and lower versions
Océ TCS400 2.2.6/2.2.5/2.2.3
Océ TCS500 1.3.2 and lower versions
|
| Microsoft bulletin |
MS08-001 |
| File details for systems equipped with a Floppy unit |
Name: patch_shf015.exe
Size: 836 Kb
Revision date: 1/22/2008
Download now » (registration required)
Click here for installation instrutions
|
| File details for systems NOT equipped with a Floppy unit |
Name: patch_shf015.iso
Size: 1 022 Kb
Revision date: 1/22/2008
Download now » (registration required)
Click here for installation instructions
|
1. Download the patch file patch_shf015.exe and save the file on
your computer(Win98/WinMe/Win2000/WinXP/Winserver2003
/VistaX86)
2. Create a floppy containing the patch :
- Doubleclick on the saved file (It is an executable which will
guide you through the creation process of the patch diskette)
- Follow the instructions on the screen
3. Shutdown the Océ Power Logic Controller
4. Insert the previously created patch diskette in the
Océ Power Logic controller floppy drive.
5. Power ON the Océ Power Logic Controller.
6. Wait until the patch is applied : a melody is played
(you will hear 2 times a 3 tonal beeps)
- it should take about ~3 minutes on a GX280 PC
- before the melody is played, a PC reboot will occur
- For Systems equipped with a monitor, an error message
may pop up on the controller screen : Ignore it and let the
process go on.
7. Remove the patch diskette from the floppy drive
Verifying if the patch was applied successfully
1. Make a « Print settings » (Refer to your Printer User manual for
more details)
2. Go to the last printout page in the section:
SDS - CONTROL PARAMETERS 22-1, the last line is called:
Patches installed = ………………………… <value>
Check that « <value> » is greater or equal to 2000000000000
Troubleshooting
• 2 rapid beeps are played when Patch has already been applied
• 2 long beeps are played when Patch file is corrupted
• Nothing happens or 7 rapid beeps are played when Patch cannot be
applied (Wrong Océ TDSX00/TCS400 version)
1. Download the patch file patch_shf015.iso and save the file on
your computer(Win98/WinMe/Win2000/WinXP/Winserver2003
/VistaX86)
2. Create a CD-ROM containing the patch from
patch_shf015.iso :
Use a CD burner software (like NERO Burner or Roxio Easy
CD Creator) to burn a CD-R from the attached ISO image:
patch_shf013_2.iso
Advices :To burn a CD-R from this ISO image file, Select an
action which "Burn a CD from an Image file",
but Do not create a CD-R with the file Patch_shf002.iso
on it.
For example :
- With NERO 5.5 Burner : use File/Burn Image
- With Roxio Easy CD Creator 5.1 : use File/Record CD
from CD Image
After CD-R has been burned, you should see on the CD-R the
following file
Patch_shf015.oce (649 184 bytes)
3. Insert the previously created CD-ROM in the Océ Power Logic
controller CD drive.
4. Restart the Océ Power Logic Controller.
5. Wait until the patch is applied : a melody is played
(you will hear 2 times a 3 tonal beeps)
- it should take about ~3 minutes on a GX260 PC
- before the melody is played, a PC reboot will occur
- For Systems equipped with a monitor, an error message
may pop up on the controller screen Ignore it and let the
process go on.
6. Remove the CD-ROM from CD drive
Verifying if the patch was applied successfully
1. Make a « Print settings » (Refer to your Printer User manual for
more details)
2. Go to the last printout page in the section:
SDS - CONTROL PARAMETERS 22-1, the last line is called:
Patches installed = ………………………… <value>
Check that « <value> » is greater or equal to 2000000000000
Troubleshooting
• 2 rapid beeps are played when Patch has already been applied
• 2 long beeps are played when Patch file is corrupted
• Nothing happens or 7 rapid beeps or 10 long beeps are played when
Patch cannot be applied (Wrong Océ TDSX00/TCSX00
version)
|
