Products  |  Software  |  Services  |  Solutions  |  Support  |  Supplies  
Contact Océ
Temporary workarounds for MS05-043 for Océ
TDS300 1.x/ TDS400 2.x/TDS600 4.x
TDS800 2.x /TDS860 1.x/TCS400 2.x
 
/NR/rdonlyres/edigk33fht3457hqq27catixvcpff722ejkjtsmiltsncvhplnwarqdwxg42a25n75idwnm7pkhzqa/_TemplateResource2.gif
 
The following temporary workarounds proposed should be
considered as temporary solutions as it just helps blocking
paths of attacks rather than correcting the underlying
vulnerability. As soon as an Océ patch is available, it must be
installed
.
 
 
 
 Set the security level to "high" by clicking the red key icon  or to  
 "Medium" by clicking the yellow key icon. Then follow the instructions 
 displayed on the screen
 
 
 
Important remark : this workaround is not applicable to Systems without
a screen, keyboard, mouse
 
 
 
 
 
Workarounds for TDS300 1.1.X/
 
Either Workaround 1 or Workaround 2 may be applied.
Workaround 1 is more restrictive (in term of features available)
than Workaround 2.
 
Workaround 1 :
 
Set the security level to "high" or "Medium" : this is accessible through
Océ Settings Editor/Security menu. Apply the change, then reboot the
controller
 
Important remark : this workaround is not applicable to Systems without
a screen, keyboard, mouse
 
 
 
 
 
 
 
Workaround 2 :
 
Whenever you want to stay in "Normal" security level, You have to
Disable SMB protocol  : this is accessible through Océ Settings
Editor/View SA settings/System/Connectivity/SMB menu
. Apply
the change, then reboot the controller.
 
Important remark : this workaround may be applied to Systems without a
screen, keyboard, mouse by means of Océ Remote Logic
 
 
 
 
Océ Corporate Site
  Home | 
Privacy policy | Terms of use | Other Océ websites »
© 2009 Océ
All rights reserved