| Patch for |
Océ 900C / 950C |
| Microsoft bulletin |
|
| File details |
Name: 1-JPCU1.ps
Size: 30 Mb
Download now »
|
Description
This patch contains a fix for two Microsoft vulnerabilities applicable for Windows NT4.
Related info
The patch covers the following Microsoft reported vulnerabilities:
MS05-011, MS05-016, MS05-017 and MS05-019
Download instructions
Download the file by selecting "Download now »". Select a temporary directory for storing the file.
Installation instructions
For Océ CPS700 with Océ 900C or Océ 950C controllers with software version V1.1, V1.2 or V2.1: Contact your local Océ representative for pre-conditions to installation of the patch.
Before you upgrade the patch, make sure that the controller is 'Idle'.
Installation instructions:
- Download 1-JPCU1.ps file via the Fiery Downloader or Command Workstation to the “Direct” Queue.
- After the system returns to 'Idle', wait 60 seconds.
- Reboot the Print Controller. If your Fiery has an LCD, choose Shut Down, and choose “Reboot System”. If your Fiery does not have an LCD, use the Windows Start/Shut Down/Restart menu. Turn off the controller.
- Switch the controller on. During boot process, a message will appear "Installing patches".
- When patches are installed, a message appears "Please reboot the system". At this point, do not reboot yet, but let the Print Controller come to idle.
- Repeat step 3, then switch the controller on again.
- Print the configuration page and make sure the correct information appears (Update Info section should contain the patch number 1-JPCU1).
|
 |
|
