1.   Download the patch file and save the file on your computer

 

     2.   Create a CD-ROM containing the patch:

           Use a CD burner software (like NERO Burner or Roxio Easy
           CD Creator) to burn a CD-R from the attached ISO image:
           Patch_shf002.iso

           Advices :To burn a CD-R from this ISO image file, Select an
                         action which "Burn a CD from an Image file",
                         but Do not create a CD-R with the file Patch_shf002.iso
                         on it.
           For example :
                         - With NERO 5.5 Burner : use  File/Burn Image
                         - With Roxio Easy CD Creator 5.1 : use  File/Record CD
                            from CD Image

 

           After CD-R has been burned, you should see on the CD-R the
           following file
                          Patch_shf002.oce (Filesize : 4 483 424  bytes)

 

      3.  Insert the previously created CD-ROM  in the Océ Power Logic
           controller CD drive.

 

      4.  Restart the Océ Power Logic Controller.

 

      5.  Wait until the patch is applied  : a melody is played
          (you will hear 2 times a 3 tonal beeps)
                - it should take about ~3 minutes on a GX260 PC
                - before the melody is played, a PC reboot will occur
                - For Systems equipped with a monitor, an error message
                  may pop up on the controller screen Ignore it and let the
                  process go on.

 

      6.     Remove the CD-ROM from CD drive

 

 

 

   1. Make a « Print settings » (Refer to your Printer User manual for
       more details)
   2. Go to the last printout page in the section:
       SDS - CONTROL PARAMETERS 22-1, the last line is called:
       Patches installed = ………………………… <value>
       Check that « <value> » is greater or equal to 4000000000000000

   Note : you can also consult Océ patch(es) identification here

 

 

    • 2 rapid beeps are played when Patch has already been applied
    • 2 long  beeps are played when Patch file is corrupted
    • Nothing happens or 7 rapid beeps are played when Patch cannot be
       applied (Wrong Océ TDSX00/TCS400 version)