Products  |  Software  |  Services  |  Solutions  |  Support  |  Supplies  
Contact Océ
Download Océ security patch
/NR/rdonlyres/edigk33fht3457hqq27catixvcpff722ejkjtsmiltsncvhplnwarqdwxg42a25n75idwnm7pkhzqa/_TemplateResource2.gif
Patch for
Océ 900C / 950C
Microsoft bulletin
Several
File details

Name: 1-emoai.zip
Size: 103 Mb

Download now »

 
 
Description
This patch contains a fix for a large number of Microsoft vulnerabilities applicable for Windows NT4. For a complete list, see the section related info.
 

Related info
The patch covers the following Microsoft reported vulnerabilities:
MS02-050, MS02-055, MS03-008 ,MS03-013, MS03-039, MS03-041, MS03-043, MS03-044, MS03-045, MS04-007, MS04-011, MS04-012 and MS04-014
Users with an Océ 900C or an Océ 950C controllers that are equiped with a FACI kit, can install Microsoft patches that are rated as "Critical" by Microsoft, directly from the Internet.
 
 
Known issues
MS02-055  Will only install if the Fiery NT image has IE 5.01 or higher.
 
Download instructions
Download the file by selecting "Download now »". Select a temporary directory for storing the file. Extract the file 1-EMOAI.ps from the zip file.
 
 
Installation instructions
For Océ CPS700 with Océ 900C or Océ 950C controllers with software version V1.1, V1.2 or V2.1: Contact your local Océ representative for pre-conditions to installation of the patch.
 
Before you upgrade the patch, make sure that the controller is 'Idle'. 

Installation instructions:
  1. Download 1-EMOAI.ps file via the Fiery Downloader or Command Workstation to the “Direct” Queue.
  2. After the system returns to 'Idle', wait 60 seconds.
  3. Reboot the Print Controller. If your Fiery has an LCD, choose Shut Down, and choose “Reboot System”. If your Fiery does not have an LCD, use the Windows Start/Shut Down/Restart menu. Turn off the controller.
  4. Switch the controller on. During boot process, a message will appear "Installing patches".
  5. When patches are installed, a message appears "Please reboot the system". At this point, do not reboot yet, but let the Print Controller come to idle.
  6. Repeat step 3, then switch the controller on again.
  7. Print the configuration page and make sure the correct information appears (Update Info section should contain the patch number 1-EMOAI).
 
 
 
Océ Corporate Site
  Home | 
Privacy policy | Terms of use | Other Océ websites »
© 2009 Océ
All rights reserved